jtara
Apr 18, 03:20 PM
It's incredibly difficult to find any technical information on your modem. It's re-branded by phone companies, and I guess they provide their own documentation, if any.
One thing that concerns me is that I found it in one place describe as a "bridge". This means that it does NOT have NAT, and would leave your computer open to attack if you do not use a router between your computer and the modem.
So you really might want to go to ATT and ask them for a list of compatible models that you could buy. Buy one with a built-in router and switch.
I also came across some discussion on how to get this modem to work with a router. It's a bit complicated. Apparently, you need a router that has a "clone MAC address" feature. It appears that it requires a single MAC address to be "registered" - not sure how this is done, whether it has to be done by ATT, etc. But anyway, it will only allow a single MAC address to talk to it, and since your computer is already the registered address, you need a router that can "clone" your computer's MAC address to the WAN side of the modem. Point is, it's set up to work with your computer and your computer only, so you have to fool it into thinking that the router is your computer.
Given the need for "clone MAC address", I don't think it would even work if you switched it between the two computers. Have you actually tried that? I think it might just refuse to talk to the second computer.
One thing that concerns me is that I found it in one place describe as a "bridge". This means that it does NOT have NAT, and would leave your computer open to attack if you do not use a router between your computer and the modem.
So you really might want to go to ATT and ask them for a list of compatible models that you could buy. Buy one with a built-in router and switch.
I also came across some discussion on how to get this modem to work with a router. It's a bit complicated. Apparently, you need a router that has a "clone MAC address" feature. It appears that it requires a single MAC address to be "registered" - not sure how this is done, whether it has to be done by ATT, etc. But anyway, it will only allow a single MAC address to talk to it, and since your computer is already the registered address, you need a router that can "clone" your computer's MAC address to the WAN side of the modem. Point is, it's set up to work with your computer and your computer only, so you have to fool it into thinking that the router is your computer.
Given the need for "clone MAC address", I don't think it would even work if you switched it between the two computers. Have you actually tried that? I think it might just refuse to talk to the second computer.
sioannou
May 4, 05:53 PM
You need a computer now , you buy now. You don't need you wait friend . Simple as that. Anyway I recently purchased mine and so far i am super happy with it !
Please don't be another one who enters the buying cycle :D
Please don't be another one who enters the buying cycle :D
robbieduncan
May 5, 05:03 PM
I looked at the contentsOfDirectoryAtPath:error: method and Apple states "An array of NSString objects identifying the directories and files (including symbolic links) contained in path." So my question is, will the IKImageBrowserView use this string and display the image? If not what is the solution to this problem?
Thanks
I've no idea. What does the IKImageBrowserView documentation say it needs?
Thanks
I've no idea. What does the IKImageBrowserView documentation say it needs?
ThaDoggg
Apr 14, 12:32 PM
I can't speak for the C560R as I have the C710. But, Denon in general has been making great IEM's. You get really bang for the buck and the quality is amazing. I had some Sennheiser's before and I used to send them in every couple of months for warranty as they kept dying. I've had my Denon's for quite a while now and can't complain.
Pgohlke
Feb 9, 05:04 PM
When I received my iPod Touch second generation for Christmas in 2008 I was excited, but then iOS 3.0 came along and I upgraded. I loved voice control but then I updated to iOS 4.2.1 and the feature was gone. Is there a way I can get voice control again. Addition information: I was jailbreaked using readsnow.
There never was or will be voice control for the 2nd generation. Only 3rd and up have it.
There never was or will be voice control for the 2nd generation. Only 3rd and up have it.
VerizoniPhone5
May 6, 01:48 PM
You'll need something more than iMovie for that, Final Cut Express at least.
But still how wud I go about doing that
But still how wud I go about doing that
geoldr
Apr 2, 03:12 AM
Hello, so I have created an application that uses the
"Application is background only" plist variable to run my program without a menu bar or dock icon. I have created an NSStatusMenu, and when i click that my main window opens. I am having a problem, however, with the program displaying behind other windows. So if I run my program from xcode, and open the window by clicking the icon in the menu, it will pop up behind xcode, and I have to move xcode to see it. I am sure there has to be a way to make it show it show up on top. Does anybody have a way to do this?
"Application is background only" plist variable to run my program without a menu bar or dock icon. I have created an NSStatusMenu, and when i click that my main window opens. I am having a problem, however, with the program displaying behind other windows. So if I run my program from xcode, and open the window by clicking the icon in the menu, it will pop up behind xcode, and I have to move xcode to see it. I am sure there has to be a way to make it show it show up on top. Does anybody have a way to do this?
lamonsas
May 6, 06:26 PM
disconnect your old mini from the router and leave the new imac connected only, the mac mini is eating the juice from your router im guessing.
rddc21
Aug 23, 11:26 PM
What is the best portable speaker for Ipod touch? taking into account bass and overall sound quality.. and of course $100-$150 price range :)
camomac
Sep 22, 04:23 PM
whats the point of waiting, when you could begin enjoying the best operating system in the world. :D
i switched earlier this year, and i have not even looked back. seriously.
i was a little upset thinking that my new purchase would be out dated in a year when i initially
read about the whole intel switch, but what ever, thats technology for you and blue velvet makes a very valid point too.
besides, when longhorn (or what ever it's called now) is released your peecee will be dated too.
i say go for it!
i switched earlier this year, and i have not even looked back. seriously.
i was a little upset thinking that my new purchase would be out dated in a year when i initially
read about the whole intel switch, but what ever, thats technology for you and blue velvet makes a very valid point too.
besides, when longhorn (or what ever it's called now) is released your peecee will be dated too.
i say go for it!
dotnina
Jan 22, 09:13 PM
Shoot ... it's not looking good, huh. :(
Thanks for the tips, everyone. I'm going to look into the DataRescue program mentioned.
I didn't realize what a HUGE mistake I was making. I guess I was assuming that, like Windows, it'll just replace files with the same name and NOT delete any other files in there. It's kind of depressing, because that was 2 weeks worth of written and audio notes for a class of mine. :( I also hope this gets fixed in Tiger ... you should know what's going to happen with the "replace folder" function.
Thanks for the tips, everyone. I'm going to look into the DataRescue program mentioned.
I didn't realize what a HUGE mistake I was making. I guess I was assuming that, like Windows, it'll just replace files with the same name and NOT delete any other files in there. It's kind of depressing, because that was 2 weeks worth of written and audio notes for a class of mine. :( I also hope this gets fixed in Tiger ... you should know what's going to happen with the "replace folder" function.
Crystal-RX
May 5, 11:00 PM
Ok, so here is the deal. I have recently found my old apple 2.1 iphone lying around from a couple years back. I'm currently on t-mobile and wanted to know how to unlock my iphone for the apps and ability to use on t-mobile. Any help would be appreciated.
--iphone 2.1 - Modem firmware 04.05.04_G (yes, this is probably outdated - havent been used in a long time )
--Itunes 10
--Mac OS X version 10.6.6
thank you
Are you talking about the Iphone 2G with the silver/black in the back? if so, restore in itunes so it has the latest firmware which is 3.1.3.
once you've done so, then unlock it by following the link her;
http://iclarified.com/entry/index.php?enid=4255
--iphone 2.1 - Modem firmware 04.05.04_G (yes, this is probably outdated - havent been used in a long time )
--Itunes 10
--Mac OS X version 10.6.6
thank you
Are you talking about the Iphone 2G with the silver/black in the back? if so, restore in itunes so it has the latest firmware which is 3.1.3.
once you've done so, then unlock it by following the link her;
http://iclarified.com/entry/index.php?enid=4255
Donz0r
Nov 21, 03:30 PM
It's coming very soon!
JD71
Nov 13, 02:24 AM
I dont know how I missed this thread, but I was there.
Look at the 6th pic, I'm 7th in line, looking at my friend's MacBook. :p
What a fun day it was.
Look at the 6th pic, I'm 7th in line, looking at my friend's MacBook. :p
What a fun day it was.
martinX
May 3, 04:51 PM
What more can I say? It has a lot of stuff (http://www.apple.com/au/imac/features.html). With the addition of Thunderbolt, even the professionals are saying it looks like a viable FCP cutter for most of their work.
Big screen, SDXC card reader, FW800, Thunderbolt, SSD option, decent video card with 2GB RAM ... it's all there.
It should be noted that there is an option to get a magic mouse or a magic trackpad for no price difference when purchasing a new iMac. Previously, the mouse was included and the trackpad was an extra.
Big screen, SDXC card reader, FW800, Thunderbolt, SSD option, decent video card with 2GB RAM ... it's all there.
It should be noted that there is an option to get a magic mouse or a magic trackpad for no price difference when purchasing a new iMac. Previously, the mouse was included and the trackpad was an extra.
liamkp
Jun 19, 09:17 PM
$50 bucks for a mic!!!! The switcheasy thumbtack is probably a litttle nicer than the buck fifty mic on ebay, but thats :cool:
Shivetya
Mar 24, 12:10 PM
and it has been suggested I reload Windows 7, do I need to first nuke it via Bootcamp and then put it back with Apple's process or can I short cut this? I just need to reload the Windows directory from what I can tell.
FWIW, whenever I try to install VMWare tools (or even Parallels) I get the same error which is
Error 1935. An error occured during the installation of assembly.
"Microsoft.VC80.CRT.publicKeyToken="1fc8b3b9a1e18e3b",type="Win32",version="8.0.50727.762*,processorAchietecture="amd64",Please...
FWIW, whenever I try to install VMWare tools (or even Parallels) I get the same error which is
Error 1935. An error occured during the installation of assembly.
"Microsoft.VC80.CRT.publicKeyToken="1fc8b3b9a1e18e3b",type="Win32",version="8.0.50727.762*,processorAchietecture="amd64",Please...
MacsRgr8
Sep 24, 04:41 AM
Take Page 3 and add a common domain suffix ;)
LOL!
Going...to...page...press...< COMMAND >...< D >... :p
LOL!
Going...to...page...press...< COMMAND >...< D >... :p
mBox
Mar 18, 03:22 PM
Hi, I have a problem with final cut pro export.
You see when I have in the timeline all videos assembled, to export in HDV-720p60 or otherwise, disappeared the last 10 seconds of the film, and not to do or how to fix it
You see when I have in the timeline all videos assembled, to export in HDV-720p60 or otherwise, disappeared the last 10 seconds of the film, and not to do or how to fix it
powergyser
Feb 14, 11:03 AM
hi
i've found the song but still in the dark about the name. maybe someone can help
http://v.youku.com/v_show/id_XODY1MjkwMTY=.html
cheers
i've found the song but still in the dark about the name. maybe someone can help
http://v.youku.com/v_show/id_XODY1MjkwMTY=.html
cheers
gwuMACaddict
Sep 9, 07:12 AM
they are snazzy looking- i cant beleive how small they are!! someone posted pics.
i think you ought to get one ;) :D
i think you ought to get one ;) :D
iThinkergoiMac
Apr 18, 06:07 AM
Apple. :rolleyes:
iThinkergoiMac
Apr 18, 06:07 AM
Apple. :rolleyes:
celticpride678
Jan 29, 09:42 AM
Can you start up in safe mode?